Plan every LED video wall before you buildPlan every LED wall before you build
WallCalc Pro turns a wall size into a cabinet layout, power and data plan, heat load and parts list. Built for LED manufacturers, AV integrators and rental teams.
WallCalc Pro, at a glance.
- A.
- One calculator for the whole wallWall size first. Enter width and height in feet or meters.
- B.
- Every cabinet placed on the gridRows, columns, resolution and fit, shown side by side.
- C.
- Circuits sized with the 80% breaker ruleLoad per circuit and phase balance, checked as you edit.
- D.
- Build files written for youPDF build plan, Excel BOM, Resolume XML and NovaStar port map from one project.
- E.
- Controller ports counted for every wallPixel capacity checked against NovaStar spec sheets.
- F.
- Heat output in BTU per hourHand the number to the HVAC contractor on day one.
Spec the wall, with confidence.
Enter the wall size and viewing distance. WallCalc Pro recommends a pixel pitch, fits the cabinets, counts circuits and ports, and writes the files your crew needs on site.
- 4
- 3
- 1
One wall, four steps, zero retyping.
Size the wall.
Enter width, height and viewing distance. WallCalc Pro suggests a pixel pitch and the cabinet series to match.
Cabinets placed on the grid.
Rows and columns snap to real cabinet sizes from your catalog, with total resolution, weight and fit shown live.
Power and data planned.
Circuits follow the 80% breaker rule, phases stay balanced, and NovaStar ports are counted against spec sheet limits.
Build files, ready to send.
Download the PDF build plan, Excel BOM, Resolume XML and NovaStar port map, or share one link with comments.
What flagged
what passed
Every LED wall has limits: cabinet sizes, controller capacity, port load, breaker ratings and heat. WallCalc Pro runs each check while you design and flags the line you crossed, before the wall ships.
| Check | Level | Load | Item | Note |
|---|---|---|---|---|
| Check 01 | L1 | 4.2 | cabinet-fit | fits 12 × 10 |
| Check 02 | L2 | 3.1 | pixel-pitch | 1.5 mm pitch |
| Check 03 | L1 | 2.4 | viewing-distance | min 1.5 m |
| Check 04 | L3 | 5.6 | controller-capacity | add 2nd unit |
| Check 05 | L2 | 2.8 | port-load | 6 ports used |
| Check 06 | L1 | 1.9 | breaker-derate | 80% rule held |
| Check 07 | L2 | 3.4 | controller-capacity | phases balanced |
| Check 08 | L1 | 2.1 | port-load | watch |
Built for the people who quote, wire and sell LED walls.
Rental and staging crews get a cabinet count, a power plan and a parts list before the quote call ends.
AV integrators check breaker load, phase balance and controller ports before anyone climbs a lift.
LED manufacturers put their own catalog in front of buyers, on their own site, under their own brand.
Content teams get a Resolume file and a port map sized to the wall, so every clip fits the first time.
- Sizing
- Cabinet grid from the wall size.
- Manual math, cabinet by cabinet.
- Catalog
- Your products, your specs.
- Copied from PDF datasheets.
- Power
- Circuits, phases, 80% rule.
- One total, no breakdown.
- Data
- Ports and controllers counted.
- Worked out on site.
- Preview
- Room scenes and elevation.
- Nothing until install day.
- Exports
- PDF, Excel, Resolume, NovaStar.
- Retyped into each tool.
- Sharing
- One link with comments.
- Attachments lost in email threads.
Cabinet grid from the wall size.
Manual math, cabinet by cabinet.
Your products, your specs.
Copied from PDF datasheets.
Circuits, phases, 80% rule.
One total, no breakdown.
Ports and controllers counted.
Worked out on site.
Room scenes and elevation.
Nothing until install day.
PDF, Excel, Resolume, NovaStar.
Retyped into each tool.
One link with comments.
Attachments lost in email threads.
The readout follows every edit.
Tracking 120 cabinets. Only problems surface.
Hands off to the tools your crew already runs.
Hover any cell to see what WallCalc Pro hands off.
Pick a plan.
Quoted to your catalog.
For one brand adding a calculator to its site.
- ·One catalog · one brandincl.
- ·Cabinet layout, resolution, weightincl.
- ·Power and heat totalsincl.
- ·Lead capture formincl.
- ·One-line embed scriptincl.
- SetupQuoted
- Catalog loadQuoted
For sales teams who show the wall in a room.
- ·Multiple brand catalogsincl.
- ·Everything in Embedincl.
- ·Studio room scenesincl.
- ·Engineering cabling viewincl.
- ·Share links with commentsincl.
- ·Full export packincl.
- ·Saved designs per accountincl.
- SetupQuoted
- Catalog loadQuoted
- Export packQuoted
- Room scenesQuoted
For manufacturers running WallCalc Pro for every dealer.
- ·Multi-tenant catalogsincl.
- ·Everything in Studioincl.
- ·Admin console with CSV importincl.
- ·Branding per tenantincl.
- ·Lead inbox per tenantincl.
- ·Custom integrationsincl.
- Setupscaled to you
- Setup feeQuoted